The main structure of the fabric slitting machine

1. Frame and transmission system: The frame is composed of left and right wall panels, brackets and unloading machinery. The transmission system is mainly used for pulling raw materials and winding finished products. Through frequency conversion and stepless speed regulation motor, the traction rubber roller passes through the motor. The V-belt, the main traction rubber roller and the follower traction rubber roller are close to each other, and the raw materials are pulled at the same time.

2. Receiving mechanism and its tension device: The receiving mechanism is mainly composed of a synchronous belt, a synchronous wheel, a magnetic powder clutch, an inflatable shaft, etc. The active force is transmitted from the synchronous belt to the synchronous wheel to make the input shaft of the magnetic powder clutch run.

3. Traction element: The traction element is mainly composed of a pair of traction rubber rollers and several hard alumina rollers, which can be used to collect the raw materials for unwinding finished products. Its power comes from the transmission of the motor through the V-belt active traction rubber roller to make it run .

4. Tool holder: The tool holder has round knife cutting and flat knife cutting. The operating handle can make the round knife move small axially through the plane cam, and adjust the shearing gap between the round knife blade and the gasket groove.

5. Waste entanglement and discharge: The waste is discharged through the air duct through the wind of the fan.

https://www.hans-machinery.com/